Two Colour Standard Cube, 1mL
0
Likes
371
Downloads
406
Views
Published on May 14, 2012
Derived from
Standard Cube 1mL
by Glitch3DModels
Description
This is another testing piece. A standard 10mm x 10mm x 10mm cube that will test the your two colour printing ability. Use this part for testing the offset values and checking your nozzle wipe. You may also find differences between the two colours of PLA or ABS or your two nozzles.
Print, Adjust, Learn.
Print, Adjust, Learn.
Instructions
Files:
0024a.stl is the combined shape, a 10mmx10mmx10mm cube
0024b.stl is for colour one
0024c.stl is for colour two
1. Write down the settings you used to build the G Code
2. Print and mark with letter to note print settings
3. Record print time, surface finish, weight and how close it is to 10mm in all directions
4. Print again to determine your printers precision/repeatability.
Its just good to keep track of these things. Its SCIENCE!
0024a.stl is the combined shape, a 10mmx10mmx10mm cube
0024b.stl is for colour one
0024c.stl is for colour two
1. Write down the settings you used to build the G Code
2. Print and mark with letter to note print settings
3. Record print time, surface finish, weight and how close it is to 10mm in all directions
4. Print again to determine your printers precision/repeatability.
Its just good to keep track of these things. Its SCIENCE!
License
Two Colour Standard Cube, 1mL by Glitch3DModels is licensed under the Attribution - Share Alike - Creative Commons license.
More from Glitch3DModels
More from 3D Printing Tests
You must be logged in to post a comment.