by whowhatwhere, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
One of those cute little things you put in bottle of vinegar/soy sauce/cooking oil/etc to allow you to pour evenly without the "gluging and spilling".
It has a tapered bottle stopper with 2 channels through it's centre One to let fluid out and the other to let air in.
I suspect that the ridges wont seal very well (partly because ABS is quite a hard plastic and partly because I have made then quite thick. However it would not take much to put a rubber washer on it to give it a good seal and hold it in place.
This design is untested.
The channels may be a little thin for some of the more viscous fluid (heavier cooking oils etc)
Bottle Pourer by whowhatwhere is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving whowhatwhere a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure whowhatwhere would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).