by thedoctor, published
This piston has a cylinder head, so it can be powered on the up and down stroke. Another entry for the Makerbot giveaway.
As with my other piston, you will need to split the document into two, the cylinder, and the piston rod. the piston rod half also indludes the cylinder head. use a file and a pair of calipers to get a snug fit. Next, drill four small holes through the cylinder head into the wall of the cylinder, so it can be screwed on. slot the piston rod into the cylinder befor screwing the cylinder head on.
Liked ByView All
Give a Shout Out
improved piston by thedoctor is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure thedoctor would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).