Vinyl Scratch Blind Bag Pony Playset
9
Likes
495
Downloads
748
Views
Published on May 25, 2012
Description
This is the third Playset designed to use MLP Blind Bag figurines. It take about 2.5 hours to print and uses about 41g of plastic with a rift and at 50% infill. This was designed in Inventor Fusion 2013 and was printed on a TOM. It has been broken into several part to be able to be printed on most any printer and to save time in prototyping.
This Playset is Vinyl Scratch's (DJ PON3's) DJ setup from A Canterlot Wedding - Part 2 of My Little Pony: Friendship is Magic.
My Little Pony is the copyright of Hasbro.
This Playset is Vinyl Scratch's (DJ PON3's) DJ setup from A Canterlot Wedding - Part 2 of My Little Pony: Friendship is Magic.
My Little Pony is the copyright of Hasbro.
Instructions
Print one of each of the following:
- Turntable
- Stand
Print two of each of the following:
- Speaker
- Arm
To Build:
1. Print Parts
2. Place (and I recommend glue) the Turntable to the Stand. Stand should be narrow at the bottom and widen towards the Turntable.
3. Place the one printed Arms in each of the two holes in the Turntable (do not glue if you want them turnable).
4. Enjoy
- Turntable
- Stand
Print two of each of the following:
- Speaker
- Arm
To Build:
1. Print Parts
2. Place (and I recommend glue) the Turntable to the Stand. Stand should be narrow at the bottom and widen towards the Turntable.
3. Place the one printed Arms in each of the two holes in the Turntable (do not glue if you want them turnable).
4. Enjoy
License
Vinyl Scratch Blind Bag Pony Playset by hazmatanddecon is licensed under the Attribution - Non-Commercial - Creative Commons license.
More from hazmatanddecon
More from Playsets
You must be logged in to post a comment.