TOM Build Platform Wire Connector Brace / Bracket
by EliteNetworks, published
This gives vertical support to the wires coming from your TOM build platform.
Print Upright 1-2 shells
Infill should not matter
My cables were drooping and getting caught in my endstop. This should allow clearance over your endstop, if your platform is that direction.
Please check this manually upon installation.
Also note that the HBP is more 'free' when connector is to front of the TOM.
Beta version gives more horizontal support.
Needs flipped upright. Slit should be on platform.
Carefully stretch brace over wire, through the split. Then push over the end of the plug / connector.
Many others out there, but this clips on easy, and is simplistic.
Liked ByView All
Give a Shout Out
TOM Build Platform Wire Connector Brace / Bracket by EliteNetworks is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving EliteNetworks a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure EliteNetworks would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).