Drawer Rail Support
1
Likes
550
Downloads
3840
Views
Published on June 4, 2012
Description
This is a replacement support for a drawer rail in our motorhome. It seems like I need to replace one of these every year, so I thought I'd make one out of ABS and see if it holds up any better.
Edit:
The original version of this was slightly off in one dimension, so I re-sized it and added the new files with "_corrected" on the end.
Edit:
The original version of this was slightly off in one dimension, so I re-sized it and added the new files with "_corrected" on the end.
Instructions
If your motorhome is similar to mine, the STL file might work for you. Just print and go. If not, I provided the SCAD file so you can modify it to suit you. Sorry, it's not commented at all, but it isn't too big, so you can probably figure it out yourself. The toughest part was getting the inlet of the slot to taper for ease of use.
License
Drawer Rail Support by marcsulf is licensed under the Attribution - Share Alike - Creative Commons license.
You must be logged in to post a comment.