Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
Mini Quick-Fit Huxley sized extruder #30DoC
29
Likes
752
Downloads
3943
Views
Published on June 4, 2012
Description
For Day 4 of 30 days of creativity ( #30DoC ) here is a miniature sized Huxley extruder, designed for my Quick-Fit X carriage.
Ideal if you need a small and lightweight 1.75mm extruder for your 3D printer.
Ideal if you need a small and lightweight 1.75mm extruder for your 3D printer.
Instructions
Comes with an in-built mount for a 30mm fan to keep your thermal block nice and cool.
It's designed to be used with the Huxley Herringbone gear set I did for Day 2. thingiverse.com/thing:24071
I also re-made a new Idler block with a bit more strength to it than the original.
It seems to work just fine, but I'm going to say it's a work in progress until I have done some more printing with it.
Made for Day 4 of 30 days of creativity ( #30DoC ) 30daysofcreativity.com/
See my blog for updates and other printing advice - richrap.blogspot.co.uk/2012/06/mini-quick-fit-huxley-sized-extruder.html
It's designed to be used with the Huxley Herringbone gear set I did for Day 2. thingiverse.com/thing:24071
I also re-made a new Idler block with a bit more strength to it than the original.
It seems to work just fine, but I'm going to say it's a work in progress until I have done some more printing with it.
Made for Day 4 of 30 days of creativity ( #30DoC ) 30daysofcreativity.com/
See my blog for updates and other printing advice - richrap.blogspot.co.uk/2012/06/mini-quick-fit-huxley-sized-extruder.html
License
Mini Quick-Fit Huxley sized extruder #30DoC by RichRap is licensed under the Attribution - Creative Commons license.
More from RichRap
More from 3D Printer Extruders
I found the sizes to be too small, so I had to scale to 120%