COG iPhone Stand v0.1
by engunneer, published
This is an iPhone stand that can be machined, waterjet, or printed. It's called COG because it keeps the center of gravity of the phone over the base, no matter what angle you set it at. The different flat spots around the back are used as the feet.
This can also be used to set the camera at a certain angle for timelapse or video using gorillacam or your favorite photo app.
You need two copies of this part made of thin material, or a really thick one can be made by itself. Use a bamboo skewer or a dowl to connect the two end pieces.
I did not glue mine together because I wanted to disassemble it to put in my bag.
Liked ByView All
Give a Shout Out
COG iPhone Stand v0.1 by engunneer is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving engunneer a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure engunneer would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).