Loading

Lego Bricks

by pokesummit, published

Lego Bricks by pokesummit Feb 12, 2014

Description

These are 2X2, 3X3, and 4X4 lego bricks I designed. You can even attach them together!

Recent Comments

view all

Printed the trio today as offered on my UM2 with PLA and 0.1 mm layer high and without support material. I was interested about the fitting and how good it printed without support material (its just my 12th print job). Considering the relative rough surface (compared to the original LEGO bricks; injection molded with ABS) they snap, hold and separate quite good. Thank you very much for the fine design.

I now have put an .stl file so that you could do more with it.

ipblythe a .thing file it's only a zip with .stl files into, rename it, extract it and fun

More from Construction Toys

view more

Makes

Liked By

view all
Deal With It

License

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag
Feb 8, 2015 - Modified Feb 8, 2015

Printed the trio today as offered on my UM2 with PLA and 0.1 mm layer high and without support material. I was interested about the fitting and how good it printed without support material (its just my 12th print job). Considering the relative rough surface (compared to the original LEGO bricks; injection molded with ABS) they snap, hold and separate quite good. Thank you very much for the fine design.

ipblythe a .thing file it's only a zip with .stl files into, rename it, extract it and fun

Please could you supply an stl file for we mortals with open source 3D printers, You will get more downloads too!

I now have put an .stl file so that you could do more with it.

Top