Domo modifiable arms version
9
Likes
148
Downloads
387
Views
Published on June 12, 2012
Description
Domo with seperate arms you glue
in the position you choose
modeled in sculptris and truespace 5
i made the body , legs and eyes in sculptris.
the teeth, and arms I made in truespace 5.
I also used truespace to "drill" the conical arm sockets in the body, and to make the feet have flat bottoms.
pic of glued and permanent marker "painted" Domo shows him in his best form
8 of these magnets on his feet (i use "crazy glue" to position the magnets, and then encapsulate the
magnets in epoxy) makes Domo on my
car hoood stay put at highway speeds!
harborfreight.com/10-piece-rare-earth-magnets-67488.html
(and No i don't own stock in Harbor freight!)
in the position you choose
modeled in sculptris and truespace 5
i made the body , legs and eyes in sculptris.
the teeth, and arms I made in truespace 5.
I also used truespace to "drill" the conical arm sockets in the body, and to make the feet have flat bottoms.
pic of glued and permanent marker "painted" Domo shows him in his best form
8 of these magnets on his feet (i use "crazy glue" to position the magnets, and then encapsulate the
magnets in epoxy) makes Domo on my
car hoood stay put at highway speeds!
harborfreight.com/10-piece-rare-earth-magnets-67488.html
(and No i don't own stock in Harbor freight!)
Instructions
I printed with support on, it only puts a small support on the underside
which was really easy to clean up
The arms have a ball shaped shoulder that you glue into the conical
holes in the body.
This gives a wide range of angles you can glue the arms into.
I printed this pretty big, but I am fairly sure even a much smaller print
would yield reasonable detail.
which was really easy to clean up
The arms have a ball shaped shoulder that you glue into the conical
holes in the body.
This gives a wide range of angles you can glue the arms into.
I printed this pretty big, but I am fairly sure even a much smaller print
would yield reasonable detail.
License
Domo modifiable arms version by cerberus333 is licensed under the Attribution - Non-Commercial - Creative Commons license.
More from cerberus333
More from Creatures
You must be logged in to post a comment.