Spool Mount
5
Likes
377
Downloads
985
Views
Published on June 13, 2012
Description
A vertical spool mount for my makergear prusa. The hubs are for a 52mm diameter spool hole,a 608 bearings, and a center to center top bar distance of 58.5mm or 2.3 in.
Instructions
This was built specifically for my printer and spool.
The hubs are designed for a 52mm spool hole and a 22mm inner hole for a 608 bearing.
The uprights are designed for a center to center distance of 58.5mm .
Bill of Materials:
2 Uprights
2 hubs
2 608 Bearings
8 nuts, what ever your horizontal top bar diameter is
8 washers, optional
1 Bar, anything that is close to the bearings ID, I am using a pencil.
The hubs are designed for a 52mm spool hole and a 22mm inner hole for a 608 bearing.
The uprights are designed for a center to center distance of 58.5mm .
Bill of Materials:
2 Uprights
2 hubs
2 608 Bearings
8 nuts, what ever your horizontal top bar diameter is
8 washers, optional
1 Bar, anything that is close to the bearings ID, I am using a pencil.
More from whisperoftheshot
More from 3D Printer Accessories
You must be logged in to post a comment.