Backspace Club Mate Bottle Tags
0
Likes
209
Downloads
540
Views
Published on June 14, 2012
Derived from
Bottle Name Tag with Logo
by daniel
Description
A derivative of Stratum 0 Club Mate Name Tags, just changed the logo for the Backspace (http://hackerspace-bamberg.de) because the people there are also nice.
Instructions
Note: there is a better version at thingiverse.com/thing:38861
The OpenSCAD version allows you to create up to 4 name tags at once. Just change the name, and optionally change the logo also.
Apparently the best way to print this is with 1 perimeter and rectilinear filling, but YMMV. Because the logo has very fine lines, it may be good to print in a slower speed.
Needs Write.scad and orbitron.dxf from thingiverse.com/thing:16193
The OpenSCAD version allows you to create up to 4 name tags at once. Just change the name, and optionally change the logo also.
Apparently the best way to print this is with 1 perimeter and rectilinear filling, but YMMV. Because the logo has very fine lines, it may be good to print in a slower speed.
Needs Write.scad and orbitron.dxf from thingiverse.com/thing:16193
License
Backspace Club Mate Bottle Tags by rohieb is licensed under the Attribution - Share Alike - Creative Commons license.
You must be logged in to post a comment.