GT2 36 Groove friendly x-end
10
Likes
605
Downloads
1429
Views
Published on June 16, 2012
Description
An improvement on jonaskuehling Improved X ends for Prusa with clamped rods. These have a bit trimmed off so larger pulleys can be used and the belt on be rubbing on the motor mount. I got Triffid Hunter to do the mods as I've had little experiance with openscad.
These work perfectly with a GT2 36 Groove pulley like that of SDP part no: A 6Z51M036DF0605 see: sdp-si.com/eStore/PartDetail.asp?Opener=Group&PartID=22736&GroupID=347
These work perfectly with a GT2 36 Groove pulley like that of SDP part no: A 6Z51M036DF0605 see: sdp-si.com/eStore/PartDetail.asp?Opener=Group&PartID=22736&GroupID=347
Instructions
Requires thingiverse.com/thing:18384 if you want to edit the scad file or print the matching idler.
You must be logged in to post a comment.
wildBill83
on
June 16, 2012
said:
The less teeth on the pulley the more accurate the printer's capabilities, look into these, a bit more $$ but 36 teeth vs 15 or 16 is worth it in my book.
https://sdp-si.com/eStore/Part...
&
amp;PartID=60190
&
amp;GroupID=346
or
https://sdp-si.com/eStore/Part...
&
amp;PartID=60189
&
amp;GroupID=346
Another fun option is to buy the timing stock and use it to mold gears directly on motor shafts. This reduces the cost of buying a pulley every time.
License
GT2 36 Groove friendly x-end by delusr is licensed under the Attribution - Share Alike - Creative Commons license.
More from delusr
More from 3D Printer Parts
hello delusr,
are you sure that this will work perfect for 36t gt2? cause the belt thickness seems to be 1.52mm, not 2.6mm.
hd