Loading
Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!

better stretchlet

by SupaFly, published

better stretchlet by SupaFly Jun 16, 2012

Description

another stretchy bracelet with fillets added to minimize cracking in corners. test it! :)

Recent Comments

view all
Yep! Definitely works in slic3r 0.9.8, thank you!
I have managed to print it with a single wall, but it still printed a base despite me disabling it in the fill section in skeinforge, any ideas?
you somewhat sliced it with 2 perimeters. It must be sliced with 1 perimeter and no infill.

More from Bracelets

view more

Liked By

view all

License

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

print only perimeter, no infill, no solid layers. Slic3r will slice it. :)

Yep! Definitely works in slic3r 0.9.8, thank you!
I have managed to print it with a single wall, but it still printed a base despite me disabling it in the fill section in skeinforge, any ideas?
you somewhat sliced it with 2 perimeters. It must be sliced with 1 perimeter and no infill.
OK, What am I missing here. It doesn't slice or print properly.
it indeeds slices in slicer, but at a certain point slicer makes it a non stretchlet one.. bout halfway in for me
stl updated - bigger clearance between outer segments
STL updated - repaired missing fillet
Very cool! I'll be printing a lot of these...
Top