Z threaded rod anti-rattle bushing for MakerFarm Prusa i3
by TimeFramed, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I got tired of hearing the threaded Z rod vibrating against the wooden hole it passes through at the top, so I printed some bushings to slip over the rods that snap into the holes.
It should fit loosely over the rod (providing no resistance), and has some small bumps on the bottom that make it a tight fit to push through the hole, but is loose once it pressed all the way through.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Z threaded rod anti-rattle bushing for MakerFarm Prusa i3 by TimeFramed is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving TimeFramed a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure TimeFramed would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).