Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
Om Nom Nopener
30
Likes
783
Downloads
1501
Views
Published on June 21, 2012
Description
This is a bottle opener version of your favourite greedy little candy eater.
Credit goes to Pranav Panchal for the brilliant initial 3D work, very impressive work. grabcad.com/library/cut-the-rope-om-nom
I have only made some changes to make it more appropriate for 3D printing, and bottle opening :)
Credit goes to Pranav Panchal for the brilliant initial 3D work, very impressive work. grabcad.com/library/cut-the-rope-om-nom
I have only made some changes to make it more appropriate for 3D printing, and bottle opening :)
Instructions
Print, insert a penny and open bottles of your favourite beverage, Om Nom! I don't have any specific print settings for this yet but this model will need to be printed with raft and support material.
The coin slot size is 19mm diam and 1.75mm thick and the bottle cap cutout is 10mm which should be deep enough for most bottle caps. I'm happy to upload more versions for different size coins.
For coin-serting best practice see this thing
thingiverse.com/thing:11025
The coin slot size is 19mm diam and 1.75mm thick and the bottle cap cutout is 10mm which should be deep enough for most bottle caps. I'm happy to upload more versions for different size coins.
For coin-serting best practice see this thing
thingiverse.com/thing:11025
License
More from Gecko
More from Kitchen & Dining
You must be logged in to post a comment.