Male/Female Minimal Calibration Pieces
by JazzyB, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I worked out that the 'perimeter width test' from the reprap.org wiki only really tested for dimensional correctness in the x axis, and I wanted a test part where I could measure the sizes achieved in x and y for male and female holes. Circles are hard to detect error in just 1 axes, so a male and female 10mm 'plug and socket' arrangement is perfect!
Print this using your default settings, the male piece should measure right on 10mm in x and y and the female socket should also measure 10x10mm internally.
Instructions incuding a comprehensive 'how to' on the correct way of achieving the correct size:
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Male/Female Minimal Calibration Pieces by JazzyB is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving JazzyB a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure JazzyB would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).