Another Printrbot Glass Clip (4mm glass)
12
Likes
503
Downloads
1120
Views
Published on July 4, 2012
Description
Clips to mount a glass sheet over a heated printbed.
Intended for use with printrbot.
Intended for use with printrbot.
Instructions
Print 4 of these.
Designed to fit the printrbot heated printbed as shipped plus a 4mm (4mm nominal, 3.75mm actual) glass sheet.
Accepts a 6-32 bolt. The hex-shaped countersink was intended as simply that, a countersink so the bolt head sits flush with the top of the clip, but it also fits a 6-32 nut. Who knows, it could come in handy.
Designed to fit the printrbot heated printbed as shipped plus a 4mm (4mm nominal, 3.75mm actual) glass sheet.
Accepts a 6-32 bolt. The hex-shaped countersink was intended as simply that, a countersink so the bolt head sits flush with the top of the clip, but it also fits a 6-32 nut. Who knows, it could come in handy.
License
Another Printrbot Glass Clip (4mm glass) by Pontifex is licensed under the Attribution - Share Alike - Creative Commons license.
More from Pontifex
More from 3D Printer Parts
You must be logged in to post a comment.