Door Handle Backing
5
Likes
139
Downloads
389
Views
Published on June 29, 2012
Description
Ever got a closet door with a hole for the door handle? Suddenly you realize you don't need the hole! What now?! THIS is the answer! For 51mm wide standard door handle holes and screws that are 4mm diameter.
Instructions
This was printed on a Printrbot+ with .3mm layer height, 3 solid layers for top and bottom, and a fill density of 15%. For the screw holes I used support material and kept it minimal and it worked fine. I easily drilled out the excess in hole with a 1/8 inch drill bit.
Once printed insert into door hole and screw handle on. Enjoy!
This was designed using AutoCAD Inventor Fusion 2013.
Once printed insert into door hole and screw handle on. Enjoy!
This was designed using AutoCAD Inventor Fusion 2013.
License
Door Handle Backing by Archimiedies is licensed under the Attribution - Share Alike - Creative Commons license.
More from Archimiedies
More from Replacement Parts
You must be logged in to post a comment.