Loading

Dark Knight Rises Batarang

by ThatTTUGuy, published

Dark Knight Rises Batarang by ThatTTUGuy Jul 2, 2012

Description

Batarang from the Dark Knight movies. Designed by Bryant Jordan.

Recent Comments

view all

I took this design and altered it for my purposes. I scaled it down a bit, and cut off the tip of one side at an angle in FreeCad. I then created an opening on that end to hold a magnet, and printed two copies, one mirrored. I will glue them back to back. So when the magnets arrive I should be left with a nice batman fridge magnet that appears to be embedded in the door.

I love the model (I just printed it out!). Very nice! However, it's exactly 'The Dark Knight Rises' batarang. The angles from the wings to the neck should be curved.

That said, I love this design - it will look great in my Batman collection.

Thanks!

More from Props

view more

Liked By

view all

Tags

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

My setting were:
Infill: 20%
Layer Height: .15mm
Shells: 5
Feedrate: 40 mm/s
Travel Feedrate: 55
Print Temp.: 220

Comments

You must be logged in to post a comment.

Corpulent on Jul 24, 2012 said:

I took this design and altered it for my purposes. I scaled it down a bit, and cut off the tip of one side at an angle in FreeCad. I then created an opening on that end to hold a magnet, and printed two copies, one mirrored. I will glue them back to back. So when the magnets arrive I should be left with a nice batman fridge magnet that appears to be embedded in the door.

InfiniTTTy on Jul 5, 2012 said:

I love the model (I just printed it out!). Very nice! However, it's exactly 'The Dark Knight Rises' batarang. The angles from the wings to the neck should be curved.

That said, I love this design - it will look great in my Batman collection.

Thanks!

Top