by endow, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I Hate to carry change because of the \"jingles\" so i made this. It holds 99 cents so you\'ll always have correct change (till you use some). It\'s rubber band powered so that when you remove a coin the next coin gets pushed up.
This design is untested.
Assemble all pieces except top cover
"Dime pusher A part 1" goes ontop of "Dime pusher A part 2"
Slap on the rubber bands from A to B (thru the hole), C to D (thru the hole) and E to F.
Put on the top cover
Fill with coins (Nickle goes in the circle thats on the corner)
To remove a coin (other than the nickel) just push up on a coin and it should get pushed out of the holder.
To remove the nickel just push it out with your finger from the hole in the bottom.
Note: "Dime Pusher B part 2" has support material included for printing purposes and will need to have it removed for assembly.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Coin Holder by endow is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving endow a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure endow would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).