by whowhatwhere, published
I had originally planned on doing a rubiks cube but its been done already so I thought I\'d try rubiks snake puzzle.
The 45 degree overhang makes it difficult to model in few parts so it\'s actually quite a lot of bit to assemble (on average 4 parts per link)
I don't know how well it will print or assemble, when I get my bot I intend to run a test (one of the many) and try some different sizes.
I've included an SKP file with the 4 basic parts in case anyone wants to suggest a better way of joining the prisms.
This design is untested.
3 STLs 1 for each build plate:
Plate 1 has 11 normal prisms and 1 end prism - Print twice for a total of 24 prisms.
Plate 2 has 46 prism locks (for attaching links to prisms)
Plate 3 has 23 links to join the prisms
The images show the link and prism locks are added to the prisms.
Liked ByView All
Give a Shout Out
Rubiks Snake by whowhatwhere is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure whowhatwhere would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).