Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
13-tooth T5 pulley
11
Likes
810
Downloads
1513
Views
Published on July 6, 2012
Derived from
T5 & XL Parametric Pulley
by droftarts
Description
A printable pulley for a NEMA 14 or 17 motor, using T5 belts, for use in a RepRap printer. Sized for a #6 SAE nut and setscrew, with the OpenSCAD file including the settings I used.
Based on the T5 & XL Parametric Pulley by droftarts, Thing #11256. Created because it's a part that isn't included in the printed parts, and it seems like it should be.
If I can find the time, I'll add M3 and M4 variations, and size the captive nut slot for a nylock fastener to make the setscrew more secure (which was the idea behind the original from droftarts).
Based on the T5 & XL Parametric Pulley by droftarts, Thing #11256. Created because it's a part that isn't included in the printed parts, and it seems like it should be.
If I can find the time, I'll add M3 and M4 variations, and size the captive nut slot for a nylock fastener to make the setscrew more secure (which was the idea behind the original from droftarts).
Instructions
1: Adjust any of the parameters in the OpenSCAD file to suit your needs (or better yet, go to the original by droftarts and use that)
2: Print
3: Use
2: Print
3: Use
License
13-tooth T5 pulley by tadrow is licensed under the Attribution - Share Alike - Creative Commons license.
More from 3D Printer Parts
You must be logged in to post a comment.