Venus of Milo

by Robo, published

Venus of Milo by Robo Apr 29, 2010

Thing Info

5653Views 1019Downloads
Report Thing


This is probably not the cleanest STL you've seen and it does not print particularly nice.

I did not make this myself. I got it here:


You probably want to print this one in white rather than the black ABS that I did (what was I thinking????).
It is 25mm x 25mm x 90mm.
If you're STL-savvy you'd even consider scaling it up to 200% and print it in two parts and glue them together.

Thing Info

5653Views 1019Downloads
Report Thing

Liked By

View All


All Rights Reserved
Venus of Milo by Robo is licensed under the All Rights Reserved license.

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

I imported the STL into Slicer, and it had gaps, and only printed from ankles down.
I then Cleaned up with Sketchup(painstakingly) and then Sliced with Cura, and It turned out Amazing. .1mm layers.
Check out my Print, If you want to replace the File you have, Mines much cleaner. There might still be a little mesh gap in the tail bone, eyes, and bottom of pony tail, but Cura cleaned it up when slicing.
Great Model, printed really well once manifold.
I posted it on Reach Printer tab,

The scan looks beautiful!

My turned out great on my 4axis CNC :)

Looks like Cthulu de Milo!