Rocket Retro 012
24
Likes
283
Downloads
1397
Views
Published on July 13, 2012
This thing was Featured on September 7, 2012
Description
A ship in the fireball xl5 tradition
Modeled in Truespace
this printed without any cracks or pinholes or mislaid strings!!!
(when i printed it big)
Modeled in Truespace
this printed without any cracks or pinholes or mislaid strings!!!
(when i printed it big)
Instructions
This is intended to be printed big!!!
3 shells 0%infill worked very well for me
(other settings default for replicator)
I didn't use a raft
if you shrink this, the little radiator fins will be fragile
and you will loose the detail
what you do, is up to you
but if you print it as big as you can,
I think you will be very happy with the results
3 shells 0%infill worked very well for me
(other settings default for replicator)
I didn't use a raft
if you shrink this, the little radiator fins will be fragile
and you will loose the detail
what you do, is up to you
but if you print it as big as you can,
I think you will be very happy with the results
License
Rocket Retro 012 by cerberus333 is licensed under the Attribution - Non-Commercial - Creative Commons license.
More from cerberus333
More from Vehicles
This was printed on a Replicator with no raft and no support and 2 shells and 0% infill. I shrunk it to half the size that it opened up as in Replicator G to see how it would print, it's about 2 inches tall. It worked great and took about 1 hour, 9 minutes. It's about 2 inches tall. The photo is taken on a slab of old growth long leaf pine from my family's homesteaded farm in northern Louisiana. I picked up several boards from a falling down shed on the old farm about 7-9 years ago and finally decided to plane them down and make something, a coffee table, I think.
I think the rocket looks pretty good where it landed!
I am thinking of printing it in some other colors and hanging on the Christmas tree this year.
cool, I went big when i printed it, but it seems to scale
down pretty well