***Guitar/ukulele*** print and play
by TomMatten, published
playable guitar/ukulele. 4 piece print set. This version the neck is Fret-less. 4 string ukulele Strings needed
1st print all files except(do not download just a pic.stl)file thats just what it will look like when assembled.
- use a strong glue "superglue" and put the pieces together or you can drill and tread them together but glue should work fine, after that you can drill little holes in the bridge so you can put ukulele strings threw and create a knot for each string.
3.you will need to install tightening keys to the head then string it up, tune and play. THATS IT
I hope you all enjoy the music TY
Liked ByView All
Give a Shout Out
***Guitar/ukulele*** print and play by TomMatten is licensed under the All Rights Reserved license.
What does this mean?
- Remixing or Changing this Thing is not allowed.
- Commercial use is not allowed.
We're sure TomMatten would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).