Noise & Vibration Dampener Pro Duplex XL+
12
Likes
377
Downloads
699
Views
Published on July 13, 2012
Derived from
Noise & Vibration Dampeners
by vector
Description
This is based on the excellent, original, Noise & Vibration Dampener. I redesigned this in Sketchup to achieve:
1] More dampening (unconfirmed).
2] More support.
3] Less likelihood that it will deform over time under the weight of the machine.
Having dual micro-feet will naturally force the foot-holder (top) part closed, applying pressure to the foot of the machine and thereby keeping the dampener itself from deforming.
1] More dampening (unconfirmed).
2] More support.
3] Less likelihood that it will deform over time under the weight of the machine.
Having dual micro-feet will naturally force the foot-holder (top) part closed, applying pressure to the foot of the machine and thereby keeping the dampener itself from deforming.
Instructions
NOTE: Download links are not working. For now, you may download the STLs here: sdrv.ms/MuN6Gs
1] Print four or use the attached plate; print using 100% infill (solid) for best performance and strength.
2] Snap one onto each foot.
3] [Optional] Add a zip tie to ensure it stays put!
4] Enjoy quieter printing!
1] Print four or use the attached plate; print using 100% infill (solid) for best performance and strength.
2] Snap one onto each foot.
3] [Optional] Add a zip tie to ensure it stays put!
4] Enjoy quieter printing!
You must be logged in to post a comment.
JeppeIbsen
on
July 30, 2012
said:
A little information about the print settings would be nice :) Is this meant to be solid?
edjuh
on
July 15, 2012
said:
I am getting xml errors
This XML file does not appear to have any style information associated with it. The document tree is shown below.
&
lt;error
&
gt;
&
lt;code
&
gt;AccessDenied
&
lt;/Code
&
gt;
&
lt;message
&
gt;Access Denied
&
lt;/Message
&
gt;
&
lt;requestid
&
gt;DFAA06A2CDA2799C
&
lt;/RequestId
&
gt;
&
lt;hostid
&
gt;
Bg3WkMKTXFImf3vIVkrhUuNbOVnGYVyDIhObXZNxhoDL1ZGsDmV3tjfsHun35DHi
&
lt;/HostId
&
gt;
&
lt;/Error
&
gt;
License
Noise & Vibration Dampener Pro Duplex XL+ by QuantumConcepts is licensed under the Attribution - Creative Commons license.
More from QuantumConcepts
More from 3D Printer Accessories
I just want you to realize few thinks. Dampening is created by flexing the material, thus deforming it a bit. (It is the material which should be able to return back to its original position, which wont happen in case of plastic, ever -> it will deform over time - 4 leg, 10 leg feet) If you make feet thicker it won't reduce the noise, but it will have definitely more support. For that we have already the printer feet. About forcing the top together. The top won't deform due to the fact that the pressure is....please learn to use Solidworks and few clases of physics won't hurt as well. No offense.
Sup?