Raspberry Pi Case
by Wrighma, published
Recent Commentsview all
Notes: the holes came out a little bit too small, I had to work with a cutter to make them bigger. The RCA adapter is about half a millimeter too close to the audio output, but doesn't prevent attaching the RCA cable. Text is unreadable, but it doesn't really matter. The bottom heats up a lot, print the top side twice and use it on the bottom too.
It's an excellent case, I love it.
Liked Byview all
Give a Shout Out
Assembly instructions are included on adafruits thing:24461
I prefer to print this with 100% solid layers.
This case is based upon the printed case (thing:26891) by deprocess which is based upon the laser cut acrylic case (thing:24461) by adafruit, with the Raspberry Pi symbol (thing:16104) uploaded by HansH. I have added labels to each port, similar to the adafruit case. These labels do not seem to work with my Makergear Prusa Mendel (.35mm nozzle). I am curious if they turn out on higher fidelity machines (sls, sla, etc)
You must be logged in to post a comment.