Loading

St Patrick's Day | 3D Printed Shamrock Glasses

by Proto3000, published

St Patrick's Day | 3D Printed Shamrock Glasses by Proto3000 Mar 11, 2014

Description

For More information visit - http://goo.gl/GU7EQf
MakerBot 3D Printers - http://goo.gl/Z4Ir6g
Facebook - https://www.facebook.com/Proto3000
Google+ - https://plus.google.com/+Proto3000/posts

Celebrate St. Patrick's day in style with your custom 3D printed glasses. Just Print, assemble, and wear.

Watch the video here: http://youtu.be/G7OqUPxv5dc

Recent Comments

view all
Evidently the STL just has a few double vertices.
Afinia software lit up with "red" areas all over but did not force the "Unsolid Model" print mode, like it does if there's any serious problem with a mesh.
Loaded it in MeshLab and was asked "Do you want to remove doubles?"
Not too familiar with meshlab, so loaded it in Blender and it found 5 double vertices.
Now Afinia shows no red, but the print needs a 10% reduction or so to fit the platform. Gonna print later today.
Tried three different times to print this and the glasses arms went a bit nutty each time on the first layer. Seems like it did two layers on the shamrocks before starting the 'arms'. Dunno why, other prints doing fine.

More from 3D Printing

view more

Makes

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag
Tried three different times to print this and the glasses arms went a bit nutty each time on the first layer. Seems like it did two layers on the shamrocks before starting the 'arms'. Dunno why, other prints doing fine.
Evidently the STL just has a few double vertices.
Afinia software lit up with "red" areas all over but did not force the "Unsolid Model" print mode, like it does if there's any serious problem with a mesh.
Loaded it in MeshLab and was asked "Do you want to remove doubles?"
Not too familiar with meshlab, so loaded it in Blender and it found 5 double vertices.
Now Afinia shows no red, but the print needs a 10% reduction or so to fit the platform. Gonna print later today.
Top