Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
Luxo Jr. M3 Holes
27
Likes
266
Downloads
1363
Views
Published on July 24, 2012
Description
Here's my derivative of Mattraptions' desk lamp, with added M3 screw holes. Some parts will still need to be edited and beefed up, but I thought I'd share it anyway. An alternative to anyone who likes screws instead :D
I've also rotated all the parts to lay flat for printing, and should be sliced okay.
I've also rotated all the parts to lay flat for printing, and should be sliced okay.
Instructions
Extra hardware needed:
8 x 10 mm M3 screws
2 x 15 mm M3 screws
1 x 35 mm M3 screw
The base still needs work to mount strong, and I've found using two 10mms from both sides instead of one long screw works better and looks a little nicer aesthetically.
8 x 10 mm M3 screws
2 x 15 mm M3 screws
1 x 35 mm M3 screw
The base still needs work to mount strong, and I've found using two 10mms from both sides instead of one long screw works better and looks a little nicer aesthetically.
More from psync
More from Sculptures
Thanks. I think this, with the black screws, is better than the click together version.
That looks great, what setting did you use on the lamp shade, the clear-ish band looks cool.
Thanks for the comment! I still have to find time to make the base a little stronger, mine broke during assembly so that's the only part I would pay attention to if you're planning to make this.
This was printed with Natural PLA on my Ultimaker at 220 C, 0.2mm layer height and 20% infill. The banding sort of occurred as part of those settings, since the cowl area is just a little thicker than the middle portion.