Glass Holder
3
Likes
211
Downloads
444
Views
Published on July 26, 2012
Description
What if your IKEA KALAS glasses ikea.com/it/it/catalog/products/10096907 always spill down? This is my solution.
I included the original Blender file and an STL version.
I included the original Blender file and an STL version.
Instructions
Printed using RepRapPro Huxley and PLA (nozzle_diameter = 0.5, filament_diameter = 1.75)
Sliced in Slic3r. It printed well (see images) using:
layer_height = 0.3
perimeters = 2
solid_layers = 2
fill_density = 0.3
perimeter_speed = 50
infill_speed = 50
I also tried reducing layer height (-33%) and increasing speed (+33%) to get the same printing time (about 50 min) and the quality is a little better:
layer_height = 0.2
perimeters = 2
solid_layers = 2
fill_density = 0.3
perimeter_speed = 75
infill_speed = 75
Sliced in Slic3r. It printed well (see images) using:
layer_height = 0.3
perimeters = 2
solid_layers = 2
fill_density = 0.3
perimeter_speed = 50
infill_speed = 50
I also tried reducing layer height (-33%) and increasing speed (+33%) to get the same printing time (about 50 min) and the quality is a little better:
layer_height = 0.2
perimeters = 2
solid_layers = 2
fill_density = 0.3
perimeter_speed = 75
infill_speed = 75
License
Glass Holder by MarcoAlici is licensed under the Attribution - Share Alike - Creative Commons license.
More from MarcoAlici
More from Kitchen & Dining
You must be logged in to post a comment.