Noh demon mask
by cerberus333, published
My model of a Noh theater mask of a demon.
Japan's take on demons is different than the western idea.
I made this not as a wearable mask, but to represent the form
the masks are portraying
while not technically a derivative,
I did get the idea of modeling this from this thing
Thanks to him for the idea of a really neat subject
Modeled in sculptris
Base modeled in truespace5
Printed OK at 3 shells 0% infill
It had a few holes on top of the head and at
the base where it transitioned from the bottom to the next
I fixed those with ABS/Acetone mix (dissolved abs white glue viscosity)
I posted Black and white because the fluorescent green made it difficult to see the details.
Liked ByView All
Give a Shout Out
Noh demon mask by cerberus333 is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure cerberus333 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).