LED Docking Light Nautical
by SvenEDT, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A 12v LED housing for a docking light for small to medium Boats.
3D PDF included in files for inspection without any fancy software.
I suggest finding your LEDs first and rigging them up in parallel clusters of either 3 or 4 for use with the 12v DC system in the boat. After preparing your electronics find a suitable size lens and print the Light housing to fit your lens and electronics. Seal with ABS or silicone. Wire into the existing lighting fuse. Mount. TEST!
LED Docking Light Nautical by SvenEDT is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving SvenEDT a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure SvenEDT would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).