Arduino-Lego Platform (Uno R3)
12
Likes
296
Downloads
1041
Views
Published on August 1, 2012
Description
This is a platform to attach your arduino in to make it compatible with Lego things, specifically Lego Mindstorms
4/23/12: Update:
Cloud.Netfabbed the stl, if it wasn't working for you, it should now:
Arduino_fixed.stl
4/23/12: Update:
Cloud.Netfabbed the stl, if it wasn't working for you, it should now:
Arduino_fixed.stl
Instructions
(NOTE: Has not been tested! May need to be slightly scaled.)
1.Print.
2.Place Arduino in the designated place.
3.Put a rubber band between the 7 and 8 ports, and the A0 and Vin ports to hold in place.
4.Attach to more Lego pieces.
5.(Not required)Upload picture and make a derivative if you changed something.
Also, The design was based off of an Arduino R3 SMD edition.
1.Print.
2.Place Arduino in the designated place.
3.Put a rubber band between the 7 and 8 ports, and the A0 and Vin ports to hold in place.
4.Attach to more Lego pieces.
5.(Not required)Upload picture and make a derivative if you changed something.
Also, The design was based off of an Arduino R3 SMD edition.
License
Arduino-Lego Platform (Uno R3) by Ishanina is licensed under the Attribution - Creative Commons license.
You must be logged in to post a comment.