Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Wide 10mm MendelMax Y Rod Holder
by IsaacDW, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This spaces the 10mm Y-axis rods of a MendelMax further apart. I have a large print bed that rocks in the X direction when printing. By spacing the rods further apart, I hope to stabilize my print surface and possibly create enough space for dual Y-axis motors. From rod center to center is 240mm.
Print two. I have not printed this yet, and it is still untested.
Wide 10mm MendelMax Y Rod Holder by IsaacDW is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving IsaacDW a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure IsaacDW would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).