Jabba the Hut
by cerberus333, published
Modeled in sculptris
and truespace 5
test printed 2 shells 0 infill
some top of model holes (typical on rounded top things)
I ran a big print using the accelerated settings.
2 shells 0% infill
adequate for my purposes
as with many of my models,
I do a follow up using ABS / acetone goop to fill in
gaps and small holes.
if you want to play with using infill and other settings you might minimize the holes.
I prefer the 0% infill and multiple shells.
My experience since switching to using the 0% infill
is far less issues with separation cracks, lighter objects
(therefore using less plastic) and if i go to 3 shells
the objects are really solid.
Liked ByView All
Give a Shout Out
Jabba the Hut by cerberus333 is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving cerberus333 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure cerberus333 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).