Duplo Compatible 4x2x2
by virtox, published
I figured my sons Duplos need something similar :-)
Children are dangerous!
Erhm, I mean:
DO NOT LET KIDS PLAY WITH THIS UNATTENDED!
Parts could break off, they might swallow or choke on it, etc.
Allow use only UNDER CLOSE SUPERVISION.
UPDATE: Added a revised file with tighter fit on the bottom.
UPDATE: The bottom fit seems a bit loose when printed on an up, but the top and sides are all nice snap fits!
I have added a revised version which should provide a tighter fit on the bottom.
I quickly dimensioned this based on a few measurement on the original large bricks.
Construction is more or less true to the original, but modified slightly in the hope that a home-printed version will be sturdy enough and not de-laminate.
Only practice will tell if it will actually fit and hold up to a toddler.
Please read the warning and think before you give something like this to a toddler!
Liked ByView All
Give a Shout Out
Duplo Compatible 4x2x2 by virtox is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure virtox would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).