PCB heated bed Mk3
39
Likes
346
Downloads
1771
Views
Published on August 10, 2012
Derived from
PCB Heatbead Mk1
by prusajr
Description
This is a derivative of Prusa's excellent PCB heatbed. It has two major additions.
First, it has a place to solder a surface mount thermistor with pads on the side to connect to the electronics. Hopefully we won't have to tape a thermistor under the bed anymore.
Second, there has a spot for a surface mount right-angle LED on the side of the bed instead of soldering a normal LED facing down like the Mk1.
First, it has a place to solder a surface mount thermistor with pads on the side to connect to the electronics. Hopefully we won't have to tape a thermistor under the bed anymore.
Second, there has a spot for a surface mount right-angle LED on the side of the bed instead of soldering a normal LED facing down like the Mk1.
Instructions
Have it produced, then use it, I guess?
Digi-key part numbers for the thermistor and the right-angle LED are:
- Thermistor: BC2562CT-ND
- LED: 754-1582-1-ND
Digi-key part numbers for the thermistor and the right-angle LED are:
- Thermistor: BC2562CT-ND
- LED: 754-1582-1-ND
You must be logged in to post a comment.
License
More from EiNSTeiN_
More from 3D Printer Accessories
great idea to have the thermistor integrated into the board. I noticed the LED you specified is only rated for 85° C Digikey 475-2519-2-ND is rated 100° C... maybe it will last a bit longer for ABS heating the bed to 110° C