PSU Board Mount
5
Likes
147
Downloads
445
Views
Published on August 10, 2012
Description
This is a simple board mount for this type of reprap power supply:
ebay.com/itm/New-12V-DC-30A-350W-Regulated-Switching-Power-Supply-MW-/120692623020?pt=LH_DefaultDomain_0&hash=item1c19d746ac#ht_4341wt_1397
It has two holes for the PSU and a single hole to mount to a board. I used 3/4" MDF under my mendelmax.
ebay.com/itm/New-12V-DC-30A-350W-Regulated-Switching-Power-Supply-MW-/120692623020?pt=LH_DefaultDomain_0&hash=item1c19d746ac#ht_4341wt_1397
It has two holes for the PSU and a single hole to mount to a board. I used 3/4" MDF under my mendelmax.
Instructions
Print 4, and attach to your PSU and board.
I used wood screws to mount through to the MDF, and PC case thumb screws into the PSU.
I used wood screws to mount through to the MDF, and PC case thumb screws into the PSU.
License
PSU Board Mount by Marrak is licensed under the Attribution - Share Alike - Creative Commons license.
More from Marrak
More from 3D Printer Accessories
You must be logged in to post a comment.