2.5 to 3.5 HDD/SDD hard drive caddy
by electropluma, published
It's a common hard drive caddy to screw your 2.5" hard drive to 3.5" mounting desktops.
If you print it, please leave us a comment with your thoughts.
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/aDjzi108xEM
Printer: EasyAir & 3ku3000
Notes:Watch out your corners, or add brim to your configuration. It's a pretty simple straightforward print.
Screw your 2.5" HDD or SSD to the bottom.
Screw the caddy to your computer using the holes at both sides.
Liked ByView All
Give a Shout Out
2.5 to 3.5 HDD/SDD hard drive caddy by electropluma is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure electropluma would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).