Ashtray - Cenicero - Parametric
0
Likes
221
Downloads
560
Views
Published on August 12, 2012
Description
Cenicero :) Mi primer diseño 3D paramétrico.
Ashtray :) My first parametric 3D design.
Ashtray :) My first parametric 3D design.
Instructions
-----------------------------------------------------------------------------------------------------------------
Antes de imprimir comprobar que el plástico no se quema o derrite con un cigarrillo.
Cambiando las variables "altura" y "diámetro" en el archivo .scad modificamos el tamaño del cenicero.
NOTA: uberstupidmove me comunica que el ABS es muy inflamable, por tanto, tener cuidado a la hora de realizar el cenicero con este plástico.
HACERLO BAJO VUESTRA PROPIA RESPONSABILIDAD.
-----------------------------------------------------------------------------------------------------------------
Before printing, check ABS or PLA does not burn with a cigarette.
Change "altura" and "diametro" variables on .scad file to modify the size of the ashtray.
NOTE: uberstupidmove comunicates me that ABS will burn violently, so be careful with that. MAKE IT UNDER YOUR OWN RESPONSIBILITY.
-----------------------------------------------------------------------------------------------------------------
Antes de imprimir comprobar que el plástico no se quema o derrite con un cigarrillo.
Cambiando las variables "altura" y "diámetro" en el archivo .scad modificamos el tamaño del cenicero.
NOTA: uberstupidmove me comunica que el ABS es muy inflamable, por tanto, tener cuidado a la hora de realizar el cenicero con este plástico.
HACERLO BAJO VUESTRA PROPIA RESPONSABILIDAD.
-----------------------------------------------------------------------------------------------------------------
Before printing, check ABS or PLA does not burn with a cigarette.
Change "altura" and "diametro" variables on .scad file to modify the size of the ashtray.
NOTE: uberstupidmove comunicates me that ABS will burn violently, so be careful with that. MAKE IT UNDER YOUR OWN RESPONSIBILITY.
-----------------------------------------------------------------------------------------------------------------
License
Ashtray - Cenicero - Parametric by iPadNanito is licensed under the Attribution - Share Alike - Creative Commons license.
More from iPadNanito
More from Household Supplies
And PLA will burn ?
I never print in PLA, always in ABS.
Put a cigarette near the PLA spool and watch :) If it burns, don't use the ashtray.
You can always put a piece of metal at the bottom of the ashtray and use it anyway.