Recreus sneakers II
by Recreus, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The new sneakers by Recreus printed in FFX 1.75mm.
During months we have investigated and work hard to develop the 1.75 mm filaflex format. Sneakerbots are the actual proof that shows filaflex works becoming in the most elastic filament on the market.
The sneakerbots by Ignacio Garcia are inspered by 80s films such us back to the future, starwars, short circuit etc.
Should be noted that the new design is more comfortables than first one. You can vary the softness changing the percentage of infill. The tongue makes that laces don´t hurt foot.
Hope you print them, wear them and be the coolest maker in your city!!
SLICER: CURA 14.01
LAYER HEIGHT: 0.2mm
PRINT SPEED: 90mm/s
PRINTER: PRUSA I3
EXTRUDER: DIRECT DRIVE (YOU CAN DOWNLOAD HERE)
HOTEND: RECREUS HOTEND (YOU CAN DOWNLOAD PLANS HERE)
TIME: 23 hrs.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Recreus sneakers II by Recreus is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Recreus a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Recreus would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).