Bike light bracket 1-1/8 inch x 20mm headset spacer.
by Neutron7, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This will let you mount a dynamo light to a bike that does not have a fork hole or somewhere for its normal bracket. it is meant for
"Herrmans H-Diver" LED headlamp which you can get on ebay, but will work on other lights if you modify the spacing (or use some washers)
Larger lights will need modification (extend the arm) but i wouldnt put any heavy metal lights on it.
I printed this on a replicator, with 1 shell and 30% infill,.25mm layer height and 65mm/sec it is nice and light but seems very strong. you will need a m5 bolt which is a little bit longer than the one provided with the light, preferably with a washer and nylon locking nut (very common in bike shops).
attach light to bracket.
install in place of current headset spacer.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Bike light bracket 1-1/8 inch x 20mm headset spacer. by Neutron7 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Neutron7 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Neutron7 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).