Prusa Y Stabilising Brace
1
Likes
66
Downloads
367
Views
Published on August 16, 2012
Description
Adjustable Brace for the 2 beds of Prusa y axis
Helps to stiffen the y axis if you are using the spring assembly method described in the reprap prusa wiki.
Once installed on my prusa it greatly improved the print quality and reduced the backlash greatly also.
Helps to stiffen the y axis if you are using the spring assembly method described in the reprap prusa wiki.
Once installed on my prusa it greatly improved the print quality and reduced the backlash greatly also.
Instructions
Print 2 of the braces
Mark the braces' screw holes on the edge of your bed
Pre drill the holes
Use small wood screws to fix to bed
Although i have not tried it i think it would work on aluminium beds if you pre drill the edge of the bed tap the holes and use bolts to fix it.
Mark the braces' screw holes on the edge of your bed
Pre drill the holes
Use small wood screws to fix to bed
Although i have not tried it i think it would work on aluminium beds if you pre drill the edge of the bed tap the holes and use bolts to fix it.
You must be logged in to post a comment.
License
Prusa Y Stabilising Brace by joshmamo is licensed under the Attribution - Share Alike - Creative Commons license.
More from joshmamo
More from 3D Printer Parts
do you have a before and after picture of what your parts looked like before you installed this?
Sure do.