by HLMAX, published
Bearing Flanges for 608 Bearings and 6mm or 1/4" drive belts.
Tire of you drive belts not centered on the idler bearings, and rubbing on the fender washers?
Here are some printable flanges for your idler bearings to get rid of the problem.
Print two flanges per bearing.
Press a 608 bearing into one of the flanges. Place a tiny bit of Crazy Glue on the inside edge, where the two flanges will mate, and press the second flange onto the bearing.
Liked ByView All
Give a Shout Out
Bearing Flanges by HLMAX is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving HLMAX a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure HLMAX would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).