by marinosdrake, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Stencil for drawing accurate circles. These can be pricey so here's one with 40, 42, 44, 46, 48 & 50mm holes. 150mm x 120mm
Download and print! Model pictured was printed on an Ultimaker. I used .2mm layers with 100% infill. Stencil is 3mm thick and printed in 7 or 8 layers.
Sand the inside of the circles lightly when done in order to get rid of any bumps or flat spots!
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Circle Stencil by marinosdrake is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving marinosdrake a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure marinosdrake would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).