Parametric Hot-bed Mount for Rostock
17
Likes
312
Downloads
1473
Views
Published on August 22, 2012
Derived from
Rostock (delta robot 3D printer)
by Johann
Description
A parametric model for mounting glass and heated bed to a printer. It was intended for the Rostock, but I suppose it can work on any stationary-bed printer with enough space to accommodate the bit of extra width off the corners.
Instructions
This piece is completely parametric. Dimensions include:
-Hotbed height off of mounting platform
-Thickness of glass
-Side length of hotbed
-Side length of glass
-Bolt size
-Bolt bore (Depth, diameter, distance from edge)
-Bracket side length
-Thickness above glass
In the code you can also change the number of bolt holes (Not really necessary though)
Just open the SCAD file and enter the variables you need. It's already set to be used with M3 bolts on the Rostock using heated bed and glass sourced from makergear.com.
-Hotbed height off of mounting platform
-Thickness of glass
-Side length of hotbed
-Side length of glass
-Bolt size
-Bolt bore (Depth, diameter, distance from edge)
-Bracket side length
-Thickness above glass
In the code you can also change the number of bolt holes (Not really necessary though)
Just open the SCAD file and enter the variables you need. It's already set to be used with M3 bolts on the Rostock using heated bed and glass sourced from makergear.com.
License
Parametric Hot-bed Mount for Rostock by grabercars is licensed under the Attribution - Share Alike - Creative Commons license.
More from grabercars
More from 3D Printer Accessories
You must be logged in to post a comment.