Fanatec Shifter Clamp
by FluidDoc, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
So the shifter mounting bars on a Fanatec steering wheel are pretty flimsy. The entire shifter will rock back and forth about 20 degrees when shifting from say 3rd to 4th. I made a little clamp to keep the bars from rotating with respect to each other and in turn that keeps the shifter from rotating. I've got one clamp on there now, but one on each side would probably be best.
Requires 3 M3x20 bolts and 3 M3 locknuts.
I made this one out of PLA, and tightened the screws till it was almost deforming. Clamps quite nicely. Some light abrasion of the rods would probably help a lot.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Fanatec Shifter Clamp by FluidDoc is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving FluidDoc a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure FluidDoc would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).