Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Thingomatic Panel Holder
by MrSimonBrooks, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
My Thingomatic is unfortunately in a place where a breeze is causing the print to cool too quick and is affecting the print quality. Hopefully these parts inspired by thingiverse.com/thing:27865 for the replicator will help anyone in a similar situation with their thingomatic.
Made to hold 3mm acrylic 221mm x 216mm with 15mm radius on bottom corners to allow for curve on thingomatic.
Thingomatic Panel Holder by MrSimonBrooks is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving MrSimonBrooks a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure MrSimonBrooks would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).