Silica Desiccant Absorber Box
by Caelum, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Just a simple box with a bunch of cutouts to allow for moisture to be absorbed without allowing for the silica desiccant to able to fall out through the holes.
In my initial print, i found that the lid was a bit too tight, however this was printed at 40mm in size. I shall test with a further print at 60mm (current default in the STL file) and check results again.
If you print one of these out, be sure to report back the results for everyone!
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Silica Desiccant Absorber Box by Caelum is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Caelum a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Caelum would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).